This test suite release is an update based on the specification: "ISO/IEC 10373-7:2019 - "Cards and security devices for personal identification — Test methods — Part 7 Contactless vicinity objects".

The following changes have been made since v1.01:

NEW

• Implementation is compliant to ISO/IEC 10373-7:2019 standard
• Add a dedicated calibration campaign to setup the RF power and the waveforms in transmission
• Add a MS-Word docx report following KEOLABS compliance report

IMPROVMENT

• Group all tests conditions in the same test campaign
• Generate evidences in XDATA format
• Functional tests includes both encoding, data rates and single or double subcarrier selection

Hardware Requirements

This test suite requires the following hardware equipment:

• A ProxiLAB Quest platform
• An ISO Test VCD Assembly
• A 50W RF amplifier model Bowen M2.30.70S
• An Oscilloscope
  • Lecroy HDO6034 or HDO6034A with firmware version 9.1.0.3
  • Lecroy HDO6034B with firmware version 10.4.0.3
• A RF Probe4
• A 3dB RF attenuator

Software Requirements

This test suite requires the following software from KEOLABS with Quest hardware:

• ProxiLAB 4.53.0
• SCRIPTIS 1.09.2
• RGPA 3.21.1
• Quest 1.09.0
• ProxiLABforQuest 1.07.0